This is a text-only version of the following page on https://raymii.org:
---
Title : Set up your own distributed, redundant, and encrypted storage grid with Tahoe-LAFS
Author : Sven Slootweg
Date : 08-11-2012
URL : https://raymii.org/s/tutorials/Tahoe_LAFS_Storage_Grid.html
Format : Markdown/HTML
---
> Note: this guide was written by Sven Slootweg, AKA joepie91, and is released
by him under the [WTFPL][1]
If you have a few different VPSes, you'll most likely have a significant amount
of unused storage space across all of them. This guide will be a quick
introduction to setting up and using [Tahoe-LAFS][2], a distributed, redundant,
and encrypted storage system - some may call it 'cloud storage'.
Recently I removed all Google Ads from this site due to their invasive tracking, as well as Google Analytics. Please, if you found this content useful, consider a small donation using any of the options below:
I'm developing an open source monitoring app called Leaf Node Monitoring, for windows, linux & android. Go check it out!
Consider sponsoring me on Github. It means the world to me if you show your appreciation and you'll help pay the server costs.
You can also sponsor me by getting a Digital Ocean VPS. With this referral link you'll get $200 credit for 60 days. Spend $25 after your credit expires and I'll get $25!
[If you need VPS to set up your own Tahoe-LAFS storage grid, try
InceptionHosting][4]
* At least 2 VPSes required, at least 3 VPSes recommended. More is better.
* Each VPS should have at least 256MB RAM (for OpenVZ burstable), or 128MB RAM (for OpenVZ vSwap and other virtualization technologies with proper memory accounting).
* Reading comprehension and an hour of your time or so :)
From the [Tahoe-LAFS website][2]:
> Tahoe-LAFS is a Free and Open cloud storage system. It distributes your data
across multiple servers. Even if some of the servers fail or are taken over by
an attacker, the entire filesystem continues to function correctly, including
preservation of your privacy and security.
The short version: Tahoe-LAFS uses a RAID-like mechanism to store 'shares'
(parts of a file) across the storage grid, according to the settings you
specified. When a file is retrieved, all storage servers will be asked for
shares of this file, and those that responded fastest will be used to retrieve
the data from. The shares are reconstructed by the requesting client into the
original file.
All shares are encrypted and checksummed; storage servers cannot possibly know
or modify the contents of a share, or the file it derives from.
There are (roughly) two types of files: immutable (these cannot be changed
afterwards) and mutable (these can be changed). Immutable files will result in a
"read capability" (an encoded string that tells Tahoe-LAFS how to find it and
how to decrypt it) and a "verify capability" (that can be used for verifying or
repairing the file). A mutable file will also yield a "write capability" that
can be used to modify the file. This way, it is possible to have a mutable file,
but restrict the write capability to yourself, while sharing the read capability
with others.
There is also a pseudo-filesystem with directories; while it isn't required to
use this, it makes it possible to for example mount part of a Tahoe-LAFS
filesystem via FUSE.
For more specifics, [read this documentation entry][5].
#### 1\. Install dependencies
Follow the below instructions for all VPSes.
To install and run Tahoe-LAFS, you will need Python (with development files),
setuptools, and the usual tools for compiling software. On Debian, this can be
installed by running `apt-get install python python-dev python-setuptools build-
essential`. If you use a different distro, your package manager or package names
may differ.
Python setuptools comes with a Python package manager (or installer, rather)
named easy_install. We'd rather have pip as our Python package manager, so we'll
install that instead: `easy_install pip`.
After installing pip, we'll install the last dependency we need to install
manually (`pip install twisted`), and then we can install Tahoe-LAFS itself:
`pip install allmydata-tahoe`.
When you're done installing all of the above, you'll have to make a new user
(`adduser tahoe`) that you're going to use to run Tahoe-LAFS under. From this
point on, run all commands as the `tahoe` user.
#### 2\. Setting up an introducer
First of all, you'll need an 'introducer' - this is basically the central server
that all other nodes connect to, to be made aware of other nodes in the storage
grid. While the storage grid will continue to function if the introducer goes
down, no new nodes will be discovered, and there will be no reconnections to
nodes that went down until the introducer is back up.
Preferably, this introducer should be installed on a server that is not a
storage node, but it's possible to run an introducer and a storage node
alongside each other.
Run the following on the VPS you wish to use as an introducer, as the `tahoe`
user:
tahoe create-introducer ~/.tahoe-introducer
tahoe start ~/.tahoe-introducer
Your introducer should now be started successfully. Read out the file `~/.tahoe-
introducer/introducer.furl` and note the entire contents down somewhere. You
will need this later to connect the other nodes.
#### 3\. Setting up storage nodes
Now it's time to set up the actual storage nodes. This will involve a little
more configuration than the introducer node. On each storage node, run the
following command: `tahoe create-node`.
If all went well, a storage node should now be created. Now edit
~/.tahoe/tahoe.cfg in your editor of choice. I will explain all the important
configuration values - you can leave the rest of the values unchanged. Note that
the 'shares' settings all apply to uploads from that particular server - each
machine connected to the network can pick their own encoding settings.
* **nickname** : The name for this particular storage node, as it will appear in the web panel.
* **introducer.furl** : The FURL for the introducer node - this is the address that you noted down before.
* **shares.needed** : This is the amount of shares that will be needed to reconstruct a file.
* **shares.happy** : This is the amount of different servers that have to be available for storing shares, for an upload to succeed.
* **shares.total** : The total amount of shares that should be created on upload. One storage node may hold more than one share, as long as it doesn't violate the shares.happy setting.
* **reserved_space** : The amount of space that should be reserved for _other applications_ on this server.
##### Reserved space
Tahoe-LAFS has a somewhat interesting way of counting space - instead of keeping
track of how much space it can use for itself, it will try to make sure that a
certain amount of space is available for other applications. What this means in
practice is, that if another application fills up 1GB of disk space, this 1GB
will be subtracted from the amount of space that Tahoe-LAFS _can_ use, not from
the amount of space that it _can't_ use. The end result is Tahoe-LAFS being very
conservative in the way it uses disk space. This means that you can typically
set the amount of reserved space to a very low value like 1GB to 5GB, because by
the time you hit that amount of free space, you will still have plenty of time
to clean up your VPS, before the last gigabytes are used up by other
applications.
##### Share settings
At first, share settings may seem very tricky to configure correctly. My advice
would be to set it as the following:
* **shares.total** : about 80% of the amount of servers you have available.
* **shares.happy** : 2 lower than shares.total
* **shares.needed** : half of shares.total
This means that if you have for example 10 storage servers, shares.total = 8,
shares.happy = 6, shares.needed = 4.
Now you can't just set any arbitrary values here - your share settings will
influence the 'expansion factor' - how many times more space you use than the
file would take up on its own. You can calculate the expansion factor by doing
`shares.total / shares.needed` \- for example, with the above suggested setup
the expansion factor would be 2, meaning that a 100MB file would take up 200MB
of space.
The level of redundancy can be calculated quite easily as well: the amount of
servers you can lose while being guaranteed to still have access to your data,
is `shares.happy - shares.needed` (this assumes worst case scenario). In most
cases, the amount of servers you can lose will be `shares.total -
shares.needed`.
#### 4\. Starting your storage nodes
On each node, simply run the command `tahoe start` as the `tahoe` user, and you
should be in business!
#### 5\. (optional) Install a local client
To more easily use Tahoe-LAFS, you may want to install a Tahoe-LAFS client on
your local machine. To do this, you should basically follow the instructions in
step 3 - however, instead of running `tahoe create-node`, you should run `tahoe
create-client`. Configuring and starting works the same, but you don't need to
fill in the `reserved_space` option (as you're not storing files).
##### Using your new storage grid
There are several ways to use your storage grid:
###### Via the web interface
Simply make sure you have a client (or storage node) installed, and point your
browser at - you will see the web interface for Tahoe-LAFS, which will allow you
to use it. The "More info" link on a directory page (or for a file) will give
you the read, write, and verify capability URIs that you need to work with them
using other methods.
##### Using Python
I recently started working on a Python module named `pytahoe`, that you can use
to easily interface with Tahoe-LAFS from a Python application or shell. To
install it, simply run `pip install pytahoe` as root - you'll need to make sure
that you have libfuse/libfuse2 installed. There is no real documentation for now
other than in the code itself, but the below code gives you an idea of how it
works:
>>> import pytahoe
>>> fs = pytahoe.Filesystem()
>>> d = fs.Directory("URI:DIR2:hnncfsbzsxv5fhdymxhycm3xc4:qjipiqg3bozb5evb6krdwfmsgks6j4ymivopgx7eoxcjb3avslqq")
>>> d.upload("devilskitchen.tar.gz")
The result of this is [something like this][6].
#### Mounting a directory
You can also mount a directory as a local filesystem using FUSE (on OpenVZ, make
sure your host supports FUSE). Right now, the easiest way appears to be using
pytahoe (this can be done from a Python shell as well). Example:
>>> import pytahoe
>>> fs = pytahoe.Filesystem()
>>> d = fs.Directory("URI:DIR2:hnncfsbzsxv5fhdymxhycm3xc4:qjipiqg3bozb5evb6krdwfmsgks6j4ymivopgx7eoxcjb3avslqq")
>>> d.mount("http://www.lowendtalk.com/mnt/something")
##### Via the web API
If you're using something that is not Python, or want a bit more control over
what you do, you may want to use the Tahoe-LAFS WebAPI directly - documentation
for this can be found [here][7].
### Extra info
HalfEatenPie November 8:
Out of curiosity @joepie91, what if one of the servers suddenly just "disappear" from the network? What happens to the files?
joepie91 November 8:
This doesn't really matter; if you have set up your share settings as I advised above, for example, you can usually lose half the servers before it becomes a problem. It's usually worth repairing (via a deep check) now and then if you often lose nodes, because this will redistribute shares over new nodes to meet the original settings again.
From a practical viewpoint, I've had many (and I mean MANY) nodes disappear from my storage grid over time, and barely ever had an issue with it. If you get to the point where you have 20 shares spread over 20 nodes and you only need 10 to reconstruct the file... your storage grid is pretty much practically invincible. Just be sure to do a deep check now and then :)
* * *
rm_ November 8:
okay assuming I have 10 nodes with 10 GB of space each, with your recommended settings:
- how many of those 10 can disappear with data still intact?
- what is the amount of usable space out of the raw 10x10GB capacity?
joepie91 November 8:
- how many of those 10 can disappear with data still intact?
Total shares would be 8, happy would be 6, and needed would be 4 - this means you can lose 6 - 4 = 2 servers (worst case scenario) without losing access to your data. It's likely possible to lose 3 or 4 servers (this depends on whether the servers you are losing hold 1 or more shares). In this, with "losing" servers I only mean the (max.) 8 servers that you uploaded a share to, to start with. Since your total amount of servers is 10, you could lose 2 more servers without any issues if those servers happen to not hold any shares for this file.
Summary: worst case scenario, you can lose any 2 servers. Best case scenario, you can lose 6 servers. It'll usually be somewhere in the middle.
- what is the amount of usable space out of the raw 10x10GB capacity?
Since your expansion factor is 8 / 4 = 2, and every storage server has an equal amount of space available, you should be able to use 100 / 2 = 50GB of practical space.
pubcrawler November 8:
how much space are you combing in nodes and doing so all over internet?
joepie91 November 8:
iqj5wkzuo2x3tdcjhauzsafpe5gwcojq [name removed] CA 13.41GB
a2bjjtujmabiwfqungzlywzyjszm2gyp [name removed] 265.96GB
fzu6dmqq23u2km6ywtlym4tvmtefn25b Box 3.35GB
oywsltqtxm6su6gu54j6bxmgh5qf6o5r Git 4.29GB
mbbs6staiw56f7dtyxxnzecixjoz2m2r Haless 44.04GB
n3fhesvxzg5mpq3gsov76lf2sdwfwo45 Konjassiem 9.16GB
z3hc2nw2g2jjhb7vntt5z3mtdcebiho6 Arvel 7.14GB
cqq4hmk7flrfwmlt6mldulfrc4swdrhl Eris 26.86GB
akd5kzq4bsmdr6yeyltaro3t2rtap5xo [name removed] 600.95GB
u5ygxnwa25ztku4qpubsjjahlp2pl5bp Discordia 11.01GB
sxbcue26orebknqpzchx5yl63ywep66n Alba 69.10GB
s72mw7cw3ojzki5wz7qxhxs2eex4ethf CVM-VZ 54.00GB
6ck5rd7g46o6kx2wxcym3ku3obwv645d [name removed] 26.60GB
hepqdbu7mohz6jg4uzozouotapfm74pk [name removed] US 11.37GB
qenkbcotohq4c4vhsfmzjmixqhj7ohww Shi 4.45GB
mhelfzivcdzjisxrlwkxo3rnmp5bef3m Basket 43.67GB
jxba3idp4epcvfughxsni5c7pprgrxkw Aarnist 33.83GB
5yunndzcq7a2bqvlyqjj6kxedgiymhtt [name removed] ZNC 13.46GB
y3hgi5fi3qdnoamemuj5qpfrnmopy5ra equinox 5.03GB
jyq6lzjwff3a7ijae54y3zfg2mcv2ykr Nijaxor 48.43GB
pu5m53joaxfdc5zwbcvzu3gv65v3wab3 Sabit 17.66GB
Total free storage space: 1313.78GB
The nodes are distributed geographically fairly evenly.
The 600.95GB node is a bit lost, because it's connected to the old introducer address (which no longer exists), so I can't use that space right now. I'm having some issues tracking down the owner :)
pubcrawler November 8:
Fascinating post with the storage amounts. So Tahoe doesn't care that nodes have different storage amounts available? No sort of disclaimer or worry or best case against such?
joepie91 November 8:
No, the actual amount of storage space that you have available doesn't really matter. The only caveat is that you won't be able to use up all of it in all situations - say that you, for example, have total/happy shares set to 10, but only 2 servers offer more than 30GB of space, then your ceiling for storing files will be at about 30GB - after all, at some point, you simply only have 2 servers left that have more space to store files, and that wouldn't satisfy shares.happy.
craigb November 8:
also, isn't it the case that by default, nodes closest in latency terms get filled up faster on average?
joepie91 November 8:
No. Nodes are, as far as I am aware, only chosen by latency when downloading. Uploading will happen with deterministic randomness - as it should, because if the storage servers were picked on basis of latency, it would create a single (geographical) point of failure.
That being said, if you're planning on for example building a CDN with Tahoe-LAFS as backend, you'll probably want to make sure that you either have an expansion factor of at least 3, or heavy caching, so that it's likely that data can be retrieved entirely from the same geographical area as the request originates from :)
### Need more help?
There's plenty more (very clear) documentation on the [Tahoe-LAFS website][2]!
:)
EDIT: For those interested in copying this guide - it's released under the
[WTFPL][1], meaning you can basically do with it whatever you want, including
copying it elsewhere. Credits or a donation are both appreciated, but neither is
required :)
### Joepie91
[Original Thread][8]
[Donate to joepie91, the author of this guide][9]
[1]: http://sam.zoy.org/wtfpl/
[2]: http://tahoe-lafs.org/
[3]: https://www.digitalocean.com/?refcode=7435ae6b8212
[4]: http://clients.inceptionhosting.com/aff.php?aff=083
[5]: https://tahoe-lafs.org/trac/tahoe-lafs/browser/git/docs/architecture.rst
[6]: http://owely.com/04swmf
[7]: https://tahoe-lafs.org/trac/tahoe-lafs/browser/docs/frontends/webapi.rst
[8]: http://www.lowendtalk.com/discussion/5813/how-to-set-up-your-own-distributed-redundant-and-encrypted-storage-grid-in-a-few-easy-steps
[9]: http://cryto.net/%7Ejoepie91/donate.html
---
License:
All the text on this website is free as in freedom unless stated otherwise.
This means you can use it in any way you want, you can copy it, change it
the way you like and republish it, as long as you release the (modified)
content under the same license to give others the same freedoms you've got
and place my name and a link to this site with the article as source.
This site uses Google Analytics for statistics and Google Adwords for
advertisements. You are tracked and Google knows everything about you.
Use an adblocker like ublock-origin if you don't want it.
All the code on this website is licensed under the GNU GPL v3 license
unless already licensed under a license which does not allows this form
of licensing or if another license is stated on that page / in that software:
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see .
Just to be clear, the information on this website is for meant for educational
purposes and you use it at your own risk. I do not take responsibility if you
screw something up. Use common sense, do not 'rm -rf /' as root for example.
If you have any questions then do not hesitate to contact me.
See https://raymii.org/s/static/About.html for details.